THIN CLIENT PRODUCTS INSTALLATION (GENERAL INSTRUCTION)

Hello Guys 

I have took my time to write and compose complete procedure/guide to install and set-up THIN Client run on your PC.

Some of you may be wondering that what is Thin Client 

A thin client is a lightweight computer that is purpose-built for remote access to a server (typically cloud or desktop virtualization environments). It depends heavily on another computer (its server) to fulfill its computational roles. You can turn one (1) Pc Into 10 - 20 remote computer no need for CPU. 

Clear instruction and guide has been provided below to get Thin client running 

1.   Activate your Windows operating system

2.   Install the thin client driver software inside the CD, from file   below or from the vendor website

3.   Patch and register it using the Multi users software 'autorun, click on your operating system, click on registration components, click on simple installation. In the case of NComputing products. this means to register the thin client to allow for multiple user login concurrently, it may also mean online product, registration.

4.   Turn off Windows firewall in both home/work and public network location settings.

NB: In other thin client products that use switch or write to connect, you need to assign individual IP address manually to each of them. But, if it NComputing product, there is no need for individual IP assigning because, the pack comes with LAN card expansion slot, so the thin clients arc connect to the server directly (mostly CPU as server), Insert N-Computing LAN CARD and RAM and  driver CD.

5.   This step only applies to other products and NOT Ncomputing product. 1 or other thin diem products different from NCompuling brand, you will connect all the Thin client LAN cable to a Switch/Hub, connect another LAN cable to the server from the Switch/Hub, power the Switch on click on Control Panel - Network and Internet - Network Connections, right click on local connection - Status - Details - write down the IP address, Subnet Musk and input manually on the  SERVER IPv4.

EXAMPLE

IP address: 192.168.1.100

Subnet: 255.255.255.0

Default Gateway and Preferred DHP server or DNS Server: 192.168.1.1

6.   For all thin client products, you will Create Remote User, click on Start Menu, search for computer management- local users and group-users- right click and select new user--create all users (PCI to infinity), deselect 'user must change password at next logon¹ select "password never expire.

7.   Add created users as Remote Users: Right click on My Computer    Properties    Remote Settings Select 'Allow connections from computers running …’ - Select User    Add    type 'Everyone' OR you may decide to type in the users manually, then click on OK.

8.   Change Remote Security Setting: Open Run from Start Menu, type "gpedit.msc then OK. Computer Configuration, select "Administrative Templates' - Windows Components Remote Desktop Services — Remote Desktop 'Session Host. - Security - Click on 'Require use of specific security layer for remote (RDP) Connections' and enable it, select "RDP" under Security layer and click OK/'Apply- Click on 'Require user authentication for remote connections by using NciM^rk level Authentication' and disable it, and click OK/Apply.

9.    Restart the Server

10. Install Ticket/Timer Software

11. This step only applies to other products and NOT Ncomputing product, For other thin client  products different from NComputing brand, you need to input IP Configuration For The Thin client themselves under LAN Setup:

12.  Their IP will vary from the server's own, FOR EXAMPLE

IP: 192,168.1.102 (for example PC 1), IP: 192.168.1.103 for PC 2, etc.

Subnet: 255.255.255.0

Default Gateway/Preferred DHP server or DNS Server: 192.168.1.100 (the server's own)

Remember to put the same server IP on all the thin client as HOST or GATEWAY in the following areas or sections;

(a) LAN Setup, (b) Auto Connect to server (c) Start Up Setup, and (d) Welcome home page (HOST}

13. Do not Enable Parental Control on all user accounts, but password the SERVER. ADDITIONAL INFORMATION FOR NCOMPUTING THIN CLIENT PRODUCTS ONLY.

1)   Install timer (True Cafe) and configure it Appropriately

(a) Create users on Terminal

(b) Configure ticketing, printers and billing

2)  Click on NC-Console Space Management

3)   Click Terminals - X-series -- station 1

4)   Right-click and click on station settings

5)   Click on Automatically start the following program u! logon

-

6}   Click on Enable Auto start

7)   Click on browse -.             ..

8)   Select C:/Program Files/TrueCafe/client/Client.exe

9)   Click OK and do so for the rest of the stations.

10) Set starting to become true cafe client interlace on the client screen (To use the lickcl to loa ,.

11) Register the N computing software

OTHER USEFUL INFORMATION

Printer Sharing:

1.   Gel connected

2.   Network and Sharing centre

Turn on everything EXCEPT password protected sharing SHOULD be turned off.

Below find Thin Client Set-up and other relative files like multi-user

 Download zip file 

or Visit Official Site to download